LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2002 >> CR-V EX, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Wheel Alignment Specifications & Adjustment Procedures) >> Wheel Alignment Procedures >> Toe-In Adjustment >> Rear

Toe-In Adjustment: Rear

WARNING: This page is about a different car, the 2004 Honda CR-V and 2003 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure parking brake is released to avoid an incorrect measurement. Check toe-in. See WHEEL ALIGNMENT SPECIFICATIONS  . If no adjustment is required, remove alignment equipment. If adjustment is required, go to next step.
  2. Hold adjusting bolt on rear lower control arm and loosen lock nut. Adjust rear toe-in by turning adjusting bolt until toe-in is correct. See WHEEL ALIGNMENT SPECIFICATIONS  . Install NEW lock nut, and tighten it while holding adjusting bolt. See Fig 1 and TORQUE SPECIFICATIONS  . Recheck toe-in.
Fig 1: Adjusting Rear Toe-In
G90E05957Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals