Parking Pin Switch
- Remove instrument panel lower cover. See DASHBOARD LOWER COVER & KNEE BOLSTER under REMOVAL & INSTALLATION. Remove upper and lower steering column covers. Disconnect park pin switch/overdrive switch 4-pin connector.
- Ensure shift lever is in "P" position. Check for continuity between park pin switch/overdrive switch 4-pin harness connector terminals No. 3 (White/Black wire) and No. 4 (Black wire). Continuity should exist. Move shift lever from "P" position. Continuity should not exist. If continuity is not as specified, replace park pin switch. See PARKING PIN SWITCH under REMOVAL & INSTALLATION.