TCS Control

WARNING: This page is about a different variant/trim than selected.

Modulator unit operates in 3 TCS control modes:

Pressure Reduction Mode: TCS NO valve is closed, TCS NC valve is open, inlet valve is closed and outlet valve is open and pump motor is on. Caliper fluid flows through outlet valve to reservoir.
Pressure Retaining Mode: TCS NO valve is open, TCS NC valve is open, inlet valve is closed and outlet valve is closed and pump motor is on. Front caliper fluid is retained by inlet valve and outlet valve.
Pressure Intensifying Mode: TCS NO valve is closed, TCS NC valve is open, inlet valve is open and outlet valve is closed and pump motor is on. Master cylinder and reservoir fluid is pumped out by pump, through damping chamber to front caliper to front calipers.