LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> Prelude Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Starting System) >> On-Vehicle Testing >> Gear Position Switch Test >> Civic

Gear Position Switch Test: Civic

WARNING: This page is about a different car, the 2001 Honda Prelude, 2001 Honda Odyssey, 2001 Honda CR-V, and 2001 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
  1. Locate gear position switch on end of transaxle. Disconnect gear position switch 10-pin connector. See Fig 1.
  2. Check for continuity between specified terminals of gear position switch with shifter in appropriate positions. See A/T GEAR POSITION SWITCH CONTINUITY  table. Replace gear position switch if continuity does not exist between specified terminals.
Fig 1: Identifying Gear Position Switch Terminals (Civic)
G00033873Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals