LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> Prelude Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Starting System) >> Bench Testing >> Brush Holder Test

Brush Holder Test

WARNING: This page is about a different car, the 2001 Honda Prelude, 2001 Honda Odyssey, 2001 Honda CR-V, and 2001 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using an ohmmeter, check continuity between positive and negative brush holders (brackets). Continuity should not exist. If continuity exists, brush holder assembly is shorted and must be replaced.
  2. Check brush length and spring tension. If brush length or spring tension is less than specification, replace brushes. See STARTER SPECIFICATIONS . Ensure brushes move freely in holders.
scientia non olet · About LEMON Manuals