LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> Prelude Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Power Recirculating Ball) >> Lubrication >> Checking Fluid Level After Repair

Checking Fluid Level After Repair

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2000 Isuzu VehiCROSS, 2000 Isuzu Trooper, 2000 Isuzu Rodeo, 2000 Isuzu Hombre, and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: DO NOT hold steering wheel at full-lock position for more than 5 seconds. Pump damage will result.

Raise and support front of vehicle. Fill fluid reservoir. Wait 2-3 minutes and refill. Start engine (DO NOT turn steering wheel) and let idle for a few seconds. Turn engine off. Check fluid level. Refill as necessary. Bleed power steering system. See HYDRAULIC SYSTEM BLEEDING .