LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> Prelude Base, Standard >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 25 (Supplemental Inflatable Restraint System) >> Diagnostics >> Diagnostic Trouble Code (DTC) >> Retrieving DTC Using SRS Indicator Light

Retrieving DTC Using SRS Indicator Light

WARNING: This page is about a different car, the 2000 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off and wait 10 seconds. Connect Honda PGM Tester to 16-pin data link connector and follow tester prompts in "SCS" menu. See Figure .
  2. Turn ignition on. SRS indicator light will come on for about 6 seconds and go off. DTC will be indicated next. DTC consists of a main code and a sub-code. Up to 3 different malfunctions can be indicated. In case of a continuous failure, DTC will be indicated repeatedly. In case of an intermittent failure, SRS indicator light will indicate DTC once, then it will stay on. If both a continuous and an intermittent failure occur, only DTC of continuous failure will be indicated. In case system is normal (no DTC), SRS indicator light will stay on.
  3. Read DTC. Turn ignition off and wait 10 seconds. Disconnect Honda PGM Tester from data link connector.
scientia non olet · About LEMON Manuals