LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> Prelude Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Lubrication >> Draining & Refilling

Draining & Refilling

  1. Ensure transaxle is at normal operating temperature (cooling fan comes on). Remove transaxle drain plug to drain fluid. Install NEW plug gasket. Tighten drain plug to 36 ft. lbs (49 N.m).
  2. Add fluid through dipstick hole. Start engine. Move gear selector through all selector positions 3 times. Ensure each gear engages. With gear selector in "N" or "P" position, let transaxle fluid warm to normal operating temperature. Turn engine off. Check fluid level. Add enough fluid to bring level to upper mark on dipstick.
scientia non olet · About LEMON Manuals