LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> Prelude Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - System & Component Testing) >> Emission Systems & Sub-Systems >> A/C Clutch Control >> A/C Clutch Relay

A/C Clutch Relay

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2000 Isuzu VehiCROSS, 2000 Isuzu Trooper, 2000 Isuzu Rodeo, 2000 Isuzu Hombre, and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect A/C clutch relay harness connector. For A/C clutch relay locations, see A/C COMPRESSOR CLUTCH RELAY LOCATION  table. Using proper mini-schematic and an ohmmeter, check continuity between A/C clutch relay winding terminals. See appropriate wiring diagram in WIRING DIAGRAMS article. Continuity should exist. Check continuity between clutch drive circuit terminals of relay. Continuity should not exist.
    A/C COMPRESSOR CLUTCH RELAY LOCATION

    Application Location
    Amigo, Rodeo, Trooper & VehiCROSS In Under-Hood Fuse/Relay Box
    Hombre On Bracket, On Left Side Of Firewall
  2. Using jumper wires, apply ground and battery voltage to relay winding. Continuity should now exist between clutch drive circuit terminals of relay. Replace A/C clutch relay if continuity does not exist.
scientia non olet · About LEMON Manuals