Engine Stalls: Cr-V

Check fuel pressure. See BASIC DIAGNOSTIC PROCEDURES article.
Check ignition wires, ignition coil and Ignition Control Module (ICM). See BASIC DIAGNOSTIC PROCEDURES article.
Check Manifold Absolute Pressure (MAP) sensor. See appropriate Diagnostic Trouble Code (DTC) in SELF-DIAGNOSTICS article.
Check Idle Air Control Valve (IAC). See appropriate Diagnostic Trouble Code (DTC) in SELF-DIAGNOSTICS article.
Check for contaminated fuel.
Check/adjust idle speed. See ON-VEHICLE ADJUSTMENTS article.
Check Crankshaft Position (CKP), Top Dead Center (TDC), Cylinder Position (CYP) and/or Crankshaft Speed Fluctuation (CKF) sensors. See appropriate Diagnostic Trouble Code (DTC) in SELF-DIAGNOSTICS article.
Check brake switch signal. See SYSTEM & COMPONENT TESTING article.