LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> Odyssey LX >> Repair and Diagnosis >> Engine Performance >> System >> Fuel & Emissions Systems >> How to Set Readiness Codes >> HO2S Heater Monitor Readiness Code >> Procedure

HO2S Heater Monitor Readiness Code: Procedure

  1. Connect the scan tool to the vehicle's data link connector (DLC), and bring up the tool's generic OBD II mode.
  2. Start the engine, and let it idle for 1 minute. The readiness code should switch from incomplete to complete.
  3. If the readiness code is still set to incomplete, check for a temporary DTC. If there is no DTC, repeat the procedure.
scientia non olet · About LEMON Manuals