Jacking & Hoisting: Hoist
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2000 Honda Prelude, 2000 Honda Odyssey, 2000 Honda Civic, 2000 Honda CR-V, and 2000 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
When removing heavy rear components such as suspension, fuel tank, spare tire or tailgate, vehicle center of gravity may change and cause vehicle to tip forward on hoist.
- On all models except Accord, when removing heavy rear components such as suspension, fuel tank, spare tire or tailgate, place additional weight in trunk of vehicle before hoisting. Placing front wheel/tire assembly in cargo area can assist with weight distribution. On Accord, when removing heavy rear components such as suspension, fuel tank or spare tire, place tall safety stands under front of vehicle after hoisting.
- Place lift blocks on reinforced support points of side body panels (between front and rear wheels). See Figure . These are same points as used with manufacturer-supplied jack. Lift hoist a few inches and rock vehicle to ensure vehicle is firmly supported. Completely lift vehicle and check for proper vehicle support.