LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1999 >> Prelude Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock Systems >> Component Testing >> Shift Lock Solenoid >> Acura

Shift Lock Solenoid: Acura

  1. Remove center console. Disconnect shift lock solenoid harness connector. Note connector terminals and wire colors. See WIRING DIAGRAMS  .
    CAUTION: Battery voltage must be applied to correct shift lock solenoid terminal or diode inside shift lock solenoid will be damaged.
  2. On Integra, connect positive battery voltage to shift lock solenoid terminal "A" (Yellow/Blue wire) and momentarily connect solenoid terminal "B" (Yellow/Black wire). On all other models, connect positive battery voltage to shift lock solenoid terminal No. 1 (Yellow or Black/Yellow wire) and momentarily connect solenoid terminal No. 3 (Green wire) to ground. On all models, note that shift lock releases when release lever is pushed and locks when release lever is released. Replace shift lock solenoid if solenoid does not operate properly.
scientia non olet · About LEMON Manuals