LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1998 >> Prelude Base, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Power Sunroof System >> System Testing >> Function Test >> Accord

Function Test: Accord

  1. Carefully pry sun roof switch/cruise control switch out of instrument panel. Unplug connectors from switches. Connect jumper wire between sun roof switch connector terminal No. 6 (Gray/Yellow wire) and body ground. Turn ignition on. If sun roof opens, check switch. See POWER SUN ROOF SWITCH CONTINUITY (ACCORD) under COMPONENT TESTING  . If sun roof does not open, check for open in Gray/Yellow wire. See WIRING DIAGRAMS  . Repair or replace as necessary.
  2. Connect jumper wire between sun roof connector terminal No. 4 (Gray/Red wire) and body ground. Turn ignition on. If sun roof closes, check switch. See POWER SUN ROOF SWITCH CONTINUITY (ACCORD) under COMPONENT TESTING  . If sun roof does not open, check for open in Gray/Red wire. See WIRING DIAGRAMS  . Repair as necessary.
  3. Connect jumper wire between sun roof connector terminal No. 5 (Yellow/Red wire) and body ground. Turn ignition on. If sun roof moves to tilt up position, check switch. See POWER SUN ROOF SWITCH CONTINUITY (ACCORD) under COMPONENT TESTING  . If sun roof does not open, check for open in Yellow/Red wire. See WIRING DIAGRAMS  . Repair as necessary.
  4. Using an ohmmeter, check for continuity between Black wire and body ground. If no continuity exists, check for open in Black wire. See WIRING DIAGRAMS  . Repair as necessary.
scientia non olet · About LEMON Manuals