LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1998 >> Odyssey LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (A/C-Heater System) >> Testing >> Compressor Clutch Coil

Compressor Clutch Coil

WARNING: This page is about a different car, the 1998 Honda Prelude. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect clutch coil connector. Measure resistance between compressor body (ground) and clutch coil connector terminal. If resistance is not 3.25-3.55 ohms at 68°F (20°C), replace clutch coil. Check compressor clutch clearance. Clearance should be .014-.26" (.35-.65 mm). If clearance is not okay, remove armature plate and add or remove shims.

scientia non olet · About LEMON Manuals