Confirming Wake-Up Mode
WARNING: This page is about a different car, the 1998 Honda Prelude. However, it is still accessible from the selected car via links, so may be relevant.
After confirming sleep mode, turn each of the following switches to ON position and wake up each multiplex control unit.
Door multiplex control unit switches:
- Driver's door lock switch (LOCK/UNLOCK).
- Driver's door key cylinder switch (UNLOCK).
- Driver's door lock knob switch (LOCK/UNLOCK).
Driver's multiplex control unit switches:
- Door-to-driver's communication line (BRN).
- Passenger's-to-driver's communication line (PNK).
- Combination light switch.
- Driver's door switch.
Passenger's multiplex control unit switches:
- Driver's-to-passenger's communication line (LT GRN).
- Passenger's door switch.
- Passenger's door key cylinder switch (LOCK/UNLOCK).
- Passenger's door lock switch (LOCK/UNLOCK).
If all applications operate properly, wake-up mode is okay. If any multiplex control unit is faulty and cannot wake up, several parts of multiplex system will not operate.