LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1997 >> Civic del Sol VTEC >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Self-Diagnostics >> Clearing Trouble Codes

Clearing Trouble Codes

NOTE: Ensure vehicle does not move and SCS service connector is not disconnected from 2-pin service check connector. If brake pedal is not operated as specified, DTC will not be cleared.
  1. Locate 2-pin test connector behind passenger-side kick panel. Install fused jumper wire or SCS Service Connector (07PAZ-0010100) between 2-pin connector terminals. See Figure or Figure .
  2. Depress brake pedal. Turn ignition switch to ON position while depressing brake pedal. ABS indicator light should turn on for 2 seconds and turn off. See Fig 1 . After ABS indicator light turns off, release brake pedal. ABS indicator light should turn on after 4 seconds.
  3. After ABS indicator light turns on, depress brake pedal again. ABS indicator light should turn off again after 4 seconds. After ABS indicator light turns off, release brake pedal again. After 4 seconds, ABS indicator light will blink 2 times for .3 second and DTC will be erased.
  4. After DTC have been erased, turn ignition switch off. Remove fused jumper wire or SCS Service Connector (07PAZ-0010100).
Fig 1: ABS Indicator Light Sequence (Clearing DTCs)
G98C10787Courtesy of AMERICAN HONDA MOTOR CO., INC.