Removal & Installation: Compressor: Removal
WARNING: This page is about a different car, the 2001 Honda CR-V and 2000 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Discharge A/C system, using approved refrigerant recovery/recycling equipment. Disconnect condenser fan harness connector.
- Remove compressor clutch harness connector and harness clip from condenser fan shroud, then disconnect compressor clutch harness connector. Remove condenser fan shroud.
- Disconnect refrigerant lines from compressor and plug to prevent contamination. Remove power steering pump and compressor drive belts. To remove compressor drive belt, remove 2 bolts from left engine mount bracket, then pass belt through gap between body and left engine mount bracket. Remove 4 compressor mounting bolts, then compressor.