Right Rear
- Turn ignition off. Remove right rear power window switch from door trim panel. Disconnect power window switch harness connector. Turn ignition on. Using a voltmeter, check voltage between terminal No. 4 (Green/Red wire) of harness connector and ground. See Fig 1
. Battery voltage should be present.
- Turn ignition off. Using an ohmmeter, check for continuity between terminals No. 5 (Blue/Red wire) and No. 6 (Brown/White wire) at harness connector. Continuity should be present. Check for continuity between terminals No. 1 (Black wire) and No. 3 (Black wire) at harness connector. Continuity should be present.
Courtesy of ISUZU MOTOR CO.