Gear Position Switch
WARNING: This page is about a different car, the 1997 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition off. Set parking brake. Remove front console to access gear position switch located on side of shifter mechanism. Disconnect gear position switch 14-pin connector. Ensure shift lever is in Park.
- Loosen 2 gear position switch mounting bolts. Slowly slide switch toward front or rear of vehicle while checking for continuity between specified gear position switch terminals No. 14 and 15. See Fig 1 . Continuity should exist. Continuity indicates gear position switch is functional.
- Adjust switch to obtain continuity. Tighten 2 gear position switch mounting bolts. Ensure vehicle starts with shifter in Park and Neutral. If adjustment is not possible to get continuity, check shifter detent and bracket for damage. If no damage is evident, replace faulty gear position switch.