LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1995 >> Prelude SE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - 2.3L >> Ignition Checks >> Electronic Ignition System >> Ignition Coil Resistance

Ignition Coil Resistance

  1. Remove primary and secondary leads from ignition coil. Using an ohmmeter, check resistance between primary terminals "A" and "B" of ignition coil. See Fig 1 . Resistance should be as specified. See IGNITION COIL RESISTANCE  .
  2. Check secondary resistance between terminal "A" and secondary output terminal (coil tower). See IGNITION COIL RESISTANCE  . Check for continuity between terminals "A" and "B". Continuity should exist. If readings are not within specification, replace coil.
    Fig 1: Identifying Ignition Coil Terminals
    G92A25130Courtesy of AMERICAN HONDA MOTOR CO., INC.
    IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)

    Application Primary Secondary
    2.3L .4 -.6 22,000-34,000
scientia non olet · About LEMON Manuals