LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1994 >> Prelude 4WS, Standard >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Ignition Switch >> Installation

Ignition Switch: Installation

  1. Install ignition switch. Use NEW shear bolts and tighten loosely. Ensure pin on ignition switch is aligned with hole in steering column.
  2. Insert key and check for proper operation of ignition switch. If switch operates properly, tighten shear bolts until heads break off. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals