LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1994 >> Passport DX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - 2.6L EFI >> Fuel System >> Fuel Delivery >> Pressure Regulator

Pressure Regulator

  1. Install fuel pressure gauge on fuel rail. Use care when installing fuel pressure gauge, as fuel lines are under pressure. Disconnect vacuum hose at pressure regulator.
  2. Start engine and note fuel pressure. Ensure vacuum supply exists at vacuum line. Reconnect vacuum hose. Fuel pressure should decrease slightly. Replace regulator if pressure does not change.
    NOTE: Malfunctioning pressure regulator VSV may set Code 25 or 53. For additional testing, see G - TESTS W/ CODES - 2.6L EFI article in the ENGINE PERFORMANCE Section.
scientia non olet · About LEMON Manuals