LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1994 >> Civic DX, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Cruise Control System) >> Diagnosis & Testing >> Set/Resume Switch

Set/Resume Switch

WARNING: This page is about a different car, the 1996 Honda Civic and 1995 Honda Civic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable air bag system. See AIR BAG RESTRAINT SYSTEM - 1995 or AIR BAG RESTRAINT SYSTEM - 1996 article. Connect SRS Test Harness "C" (07LAZ-SL40300) to cable reel 6-pin connector. Using a DVOM, check for continuity between SRS Test Harness "C" connector terminals No. 2 and No. 3 with SET pressed. See Fig 1 . If continuity exists, go to next step. If continuity does not exist, go to step 3).
    Fig 1: SRS Test Harness "C" Terminals
    G93G01502Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Using a DVOM, check for continuity between SRS Test Harness "C" connector terminals No. 1 and No. 3 with RESUME pressed. See Fig 1 . If continuity exists, SET/RESUME switch and cable reel are okay. If continuity does not exist, go to next step.
  3. Remove SET/RESUME switch. See SET/RESUME SWITCH  under REMOVAL & INSTALLATION. Using a DVOM, check for continuity between SET/RESUME switch terminals "A" or "A' " and "C" with SET pressed. See Fig 2 . If continuity exists, go to next step. If continuity does not exist, replace SET/RESUME switch.
  4. Using DVOM, check for continuity between SET/RESUME switch terminals "A" or "A' " and "B" with RESUME pressed. See Fig 2 . If continuity exists, replace cable reel. See CABLE REEL  under REMOVAL & INSTALLATION. If continuity does not exist, replace SET/RESUME switch.
    Fig 2: SET/RESUME Switch Terminals (Typical)
    G93I01503Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals