LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1993 >> Prelude VTEC >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Brush Holders Test

Brush Holders Test

  1. Using an ohmmeter, check continuity between the positive and negative brush holders (brackets). Continuity should not exist. If continuity exists, brush holder assembly is shorted and must be replaced.
  2. Check brush length and spring tension. If brush length or spring tension is less than specification, replace brushes. See STARTER SPECIFICATIONS  table. Ensure brushes move freely in holders.
scientia non olet · About LEMON Manuals