Master Switch Test
Remove power window master switch. See MASTER POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance of switch terminals with switch in indicated positions. If continuity is not as specified, replace switch. See Fig 1 . See POWER WINDOW MASTER SWITCH CONTINUITY TEST table.
POWER WINDOW MASTER SWITCH CONTINUITY TEST
| Position | Pin Continuity | |||
|---|---|---|---|---|
| Main Switch | ||||
| On | "F" & "J" | |||
| OFF | (1) * | |||
| Driver's Switch | ||||
| Off | (1) * | |||
| Up | "I" & "J" | |||
| Down | "C" & "J" | |||
| Down (AUTO) | "C", "B" & "J" | |||
| Passenger's Switch | ||||
| Up | "L" & "F" | |||
| Down | "K" & "F" | |||
| Rear Window Switch | ||||
| Up | "N" & "F" | |||
| Down | "M" & "F" | |||
|
||||