LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1992 >> Prelude Si, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Wheel Alignment Procedures >> Toe-In Adjustment >> Accord

Toe-In Adjustment: Accord

  1. Secure steering wheel in straight-ahead position. Measure front wheel toe-in. See WHEEL ALIGNMENT SPECIFICATIONS . If adjustment is needed, loosen tie rod lock nuts. Turn both tie rods equally in same direction until front wheels are in straight-ahead position and toe-in reading is correct. Tighten tie rod lock nuts. Reposition tie rod boots if they are twisted. Tighten adjusting bolts.
  2. Ensure parking brake is released. Check rear wheel toe-in. If rear toe-in needs adjustment, note position of adjusting bolt on rear control arm. Loosen bolt. See Fig 1. Adjust rear toe-in by turning adjusting bolt until rear toe-in is correct.
Fig 1: Adjusting Rear Toe-In (Accord)
G91A02805Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals