LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1991 >> Civic Si >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Integrated Control Unit >> Removal & Installation >> Ignition Key Switch

Ignition Key Switch

  1. Remove the steering column lower cover. Then disconnect the 5-P connector from the main wire harness. See Fig 1 .
  2. Remove the key switch from the key cylinder by removing attaching screw.
  3. To install, reverse removal procedures.
Fig 1: Removing & Installing Ignition Key Switch
G00147528Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals