Power Mirror Switch Test
Remove power mirror switch. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check for continuity between appropriate mirror switch terminals. See POWER MIRROR SWITCH CONTINUITY TEST table. See Figure , Figure and Figure . If switch fails any test, replace switch.
POWER MIRROR SWITCH CONTINUITY TEST
| Application | Terminals | ||
|---|---|---|---|
| Accord & Civic | |||
| Left Mirror | |||
| Off | 4, 5, 7 & 10 | ||
| Up | 5 & 9 | ||
| Down | 4 & 9, 7 & 9 | ||
| Left | 5 & 9, 7 & 9 | ||
| Right | 4 & 9 | ||
| Right Mirror | |||
| Off | 3, 4, 6 & 10 | ||
| Up | 5 & 9 | ||
| Down | 3 & 9, 6 & 9 | ||
| Left | 5 & 9, 6 & 9 | ||
| Right | 3 & 9 | ||
| Prelude | |||
| Left Mirror | |||
| Off | 3, 6, 9 & 10 | ||
| Up | 3 & 5 | ||
| Down | 5 & 9, 5 & 10 | ||
| Left | 3 & 5, 3 & 10 | ||
| Right | 5 & 9 | ||
| Right Mirror | |||
| Off | 3, 6, 7 & 8 | ||
| Up | 3 & 5 | ||
| Down | 5 & 7, 5 & 8 | ||
| Left | 3 & 5, 5 & 7 | ||
| Right | 5 & 8 | ||