LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1987 >> Prelude Base, Standard >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering System - Power >> Overhaul >> Steering Gear >> Reassembly

Steering Gear: Reassembly

  1. Grease all bearings and sliding surfaces before reassembly. Using Drift (07749-0010000 ) and Sleeve (07746-0010300 ), drive bearing into gear housing. See Figure and Figure .
  2. Install pinion holder into housing. Install snap ring with tapered side facing out away from housing. Align snap ring ends with flat part of pinion holder.
scientia non olet · About LEMON Manuals