LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1987 >> Prelude Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Brake Switch >> Prelude

Brake Switch: Prelude

  1. Disconnect 4-pin connector from switch. Check that there is continuity between terminals "A" and "D" with brake pedal released, and between terminals "B" and "C" with brake pedal depressed.
  2. Ensure circuit is open between terminals "A" and "D" with brake pedal depressed, and between terminals "B" and "C" with brake pedal released. Adjust pedal height or replace switch as necessary. See Fig 1 .
Fig 1: Brake Switch Terminal Identification
G74189Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals