LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1987 >> Civic Si >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel - Standard >> Testing >> Key Switch

Key Switch

  1. Remove lower steering column cover for access to 2 pin wire connector. Separate connector and position ohmmeter probes on terminals. See Fig 1 .
  2. With key in ignition switch, turn to the "ON" position, then to "LOCK" position and remove key. Continuity should register while key is inserted. There should be no continuity after key is removed from ignition switch.
Fig 1: Checking Key Switch Continuity
G64943Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals