Control Unit Input Test No. 12

CONTROL UNIT INPUT TEST NO. 12 ⁽¹⁾

Wire Color

Test: Desired Result

Possible Cause

YELLOW/BLACK

Check for voltage to ground: Should be at least 7V above 10 mph.

Open circuit in wire. Blown No. 1 (15A) fuse (dash fuse box). Faulty beeper.

⁽¹⁾	Raise front of car, support w/safety stands, block rear wheels, set parking brake. Start engine accelerate slowly in 2nd gear is the Test Condition.

NOTE: If all tests results indicate system is normal, and all 16-Pin connectors at the Automatic Seat Belt Control Unit are clean and tight, then replace Automatic Seat Belt Control Unit with a known good unit and retest.