Front Wiper Motor
- Remove cowl air scoop and grille. Unbolt motor to gain access to connector. Disconnect wiring connector. Disconnect wiper motor linkage from motor.
- Test low speed connection by applying battery voltage to Green/Black (positive), and Blue (negative) wires at motor connector.
- Test high speed by applying voltage to Green/Blue (positive) on CRX Green/Black (positive), and Blue/Yellow (negative) wires at motor connector.
- To test high speed on Legend, apply battery voltage to Green/Black (positive), and Blue/Green (negative) wires at motor connector. Replace motor, if motor does not operate smoothly.