LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1986 >> Civic DX, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Electronic Control System >> Ecu Trouble Shooting >> Idle Control Solenoid Valve

Idle Control Solenoid Valve

  1. Connect system checker harness between ECU and connector. Connect voltmeter positive probe to terminal A11 (Green/Black wire) and negative probe to terminal A18 (Black/Red wire).
  2. Start engine. Measure voltage at connector within 10 seconds. Voltage should be .5-1.5 volts. If voltage is as specified, raise engine speed to more than 1500 RPM. If more than 9 volts is available, replace ECU.
  3. If no voltage, check for open circuit in Black/Yellow wire between No. 4 fuse and idle control solenoid valve, open circuit in Green/White wire between idle control solenoid valve and ECU, or an open circuit in idle control solenoid valve. If 9 volts or more, replace ECU.
scientia non olet · About LEMON Manuals