LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1985 >> Prelude Si, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - TOYO DENSO Electronic >> Testing >> Ignition Coil

Ignition Coil

  1. Turn ignition off. Disconnect wiring from ignition coil terminals. Connect an ohmmeter across coil terminals. On Accord and Prelude, reading should be 1.06-1.24 ohms.
  2. On Accord and Prelude, secondary resistance should be 7400-11,000 ohms. If readings are not within specification, replace ignition coil.
scientia non olet · About LEMON Manuals