LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1985 >> Prelude Si, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - HITACHI Electronic >> Testing >> Ignition Coil

Ignition Coil

  1. Turn ignition off. Disconnect wiring from ignition coil terminals. Connect an ohmmeter across coil terminals. See Fig 1. On Accord and Prelude, reading should be 1.06-1.24 ohms.
  2. Set ohmmeter in x1000 range. Connect ohmmeter leads to ignition coil positive terminal and coil tower terminal. See Fig 1.
  3. Secondary resistance should be 7400-11,000 ohms. If readings are not within specifications, replace ignition coil.
Fig 1: Ignition Coil Test Some use conventional type coil.
G34197
scientia non olet · About LEMON Manuals