LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1985 >> Civic DX, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - HONDA PGM-FI >> Testing >> Crank Angle Sensor >> CYL Sensor

CYL Sensor

  1. Release connector from CYL sensor. Measure resistance between White terminal and Red terminal at sensor. Specified resistance should read 0.65-0.85 k/ohms.
  2. Measure insulation resistance between White/Red terminal of sensor and crank angle sensor housing. Resistance should read 100 k/ohms or more.
Fig 1: Testing CYL and TDC Sensors
G35494
scientia non olet · About LEMON Manuals