LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1983 >> Prelude Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustment >> Caster >> Prelude

Wheel Alignment Specifications & Procedures: Adjustment: Caster: Prelude

NOTE: Alignment adjustments must be carried out in this order: camber, caster, then toe-in.
  1. Remove spindle nut and install wheel alignment tool (07410-0010200), install gauge on spindle and install a set of turning radius gauges under front tires. Check caster angle.
  2. Loosen 16 mm nuts on front beam radius rods and adjust by turning lock nut on the end of radius rod as required. To increase turn counterclockwise and to decrease turn clockwise. Tighten bolts, remove gauge and reinstall spindle nut.
scientia non olet · About LEMON Manuals