LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1983 >> Prelude Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - TOYO DENSO Electronic >> Testing >> Component Tests >> Ignition Wire Resistance

Ignition Wire Resistance

  1. Carefully remove wires by pulling on their rubber boots. Do not bend wire or conductor may be broken. Check for corroded condition, cleaning if necessary. Connect ohmmeter probes (set in x1000 scale) to each end of ignition wires.
  2. Resistance reading should be 25,000 ohms or less per wire. If not, replace wires.
scientia non olet · About LEMON Manuals