Removal & Installation

Raise vehicle and support on jack stands. On Civic Hatchback and Sedan models, remove the left rear wheel. On all models, disconnect the electrical leads at fuel pump and clamp fuel lines between pump and tank.
Remove fuel pump cover bolts and lift off cover and pump as an assembly. Disassemble pump from cover. To install, reverse removal procedure.

Fig 1: Fuel Pump Electrical Circuit & Components
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Illustration applies to the Accord model only.

Fig 2: Fuel Pump Electrical Circuit & Components
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Illustration applies to Civic & Prelude models.