Rear (CVCC Only)
To adjust toe-in, loosen lock nuts on radius rods. Rotate radius rods until toe-in is within specifications, then tighten lock nuts.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | ||
|---|---|---|---|---|---|---|
| Inner | Outer | |||||
| Civic | 1 3/4 | 1/2 | 3/64 | ..... | ..... | |
| CVCC | ||||||
| Front | 1 3/4 ± 1/2 | 1/2 ± 1/2 | 3/64 | ..... | ..... | |
| Rear | ..... | 1/2 ± 1/4 | 0 ± 5/64 | ..... | ..... | |