LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1997 >> Metro Base >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> CLOCKSPRING Coil & Combination Switch >> Removal

CLOCKSPRING Coil & Combination Switch: Removal

  1. Before proceeding, follow air bag service precautions. See SERVICE PRECAUTIONS. Disable air bag system. See DISABLING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Remove driver-side air bag module. See DRIVER-SIDE AIR BAG INFLATOR MODULE. Remove steering wheel retaining nut. Mark steering wheel and shaft for reassembly reference. Using steering wheel puller, remove steering wheel. See Figure.
  3. Remove lower instrument panel cover from instrument panel for access to steering column. Remove upper and lower steering column covers from steering column for access to coil spring and combination switch. If upper steering column cover is difficult to remove, it may be necessary to loosen steering column mounting bolts.
  4. Remove wiring harness clamps on steering column for clockspring coil and combination switch wiring harness. Disconnect wiring harness for clockspring coil and combination switch. Remove clockspring coil and combination switch from steering column.
scientia non olet · About LEMON Manuals