Camshaft Specifications
WARNING: This page is about a different variant/trim than selected.
CAMSHAFT
| Application | In. (mm) | |||
|---|---|---|---|---|
| Bore Diameter (1) | ||||
| "A" | 1.7402-1.7407 (44.201-44.214) | |||
| "B" | 1.7480-1.7486 (44.399-44.414) | |||
| "C" | 1.7560-1.7565 (44.602-44.615) | |||
| "D" | 1.7638-1.7644 (44.800-44.816) | |||
| "E" | 1.7716-1.7723 (44.999-45.016) | |||
| Journal Diameter (1) | ||||
| "A" | 1.7372-1.7381 (44.125-44.148) | |||
| "B" | 1.7451-1.7460 (44.326-44.348) | |||
| "C" | 1.7530-1.7539 (44.526-44.549) | |||
| "D" | 1.7609-1.7618 (44.727-44.750) | |||
| "E" | 1.7687-1.7697 (44.925-44.950) | |||
| Journal Runout | .0039 (.010) | |||
| Lobe Height | ||||
| Standard | 1.5014 (38.136) | |||
| Wear Limit | 1.4975 (38.037) | |||
| Oil Clearance | ||||
| Standard | .0020-.0036 (.051-.091) | |||
| Wear Limit | .0059 (.150) | |||
|
||||