Overdrive Brake: Inspection
- Clean all components (except discs) with solvent. Dry with compressed air. Inspect flanges, plates and discs for flaking or burnt areas. If disc lining is peeling or discolored, replace discs as necessary.
- Using calipers, measure free length of piston return springs. Standard free length is .594" (15.10 mm). Replace return springs that do not measure as specified.
CAUTION:
Clutch discs should be soaked in ATF for 15 minutes prior to installation. Lubricate all parts with ATF. Coat thrust bearings and races with petroleum jelly.