LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1996 >> Tracker LSi, 4D Utility, 4WD, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Window Regulator & Motor >> Rear

Window Regulator & Motor: Rear

  1. Remove door trim cover. See DOOR TRIM COVER  . Lower rear side door window completely. Remove door trim cover. See DOOR TRIM COVER. Remove water deflector to gain access to gain access to 2 window-to-regulator equalizer bracket screws. Using a flat-bladed tool wrapped in tape, remove outer sealing strip Remove window-to-regulator equalizer bracket screws.
  2. Remove rear side door window run. Remove 2 screws and center door sash. Remove rear side stationary window. Remove 2 screws and window. Remove 6 window regulator screws. Remove window regulator through large opening in inner door panel. To install, reverse removal procedure. Raise window completely and tighten 6 regulator screws and 2 window screws.
scientia non olet · About LEMON Manuals