LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1996 >> Tracker LSi, 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Neutral Safety Switch >> 3-Speed

Neutral Safety Switch: 3-Speed

  1. Disconnect negative battery cable. Ensure gearshift lever and transmission shift selector lever are in Neutral. Loosen neutral safety switch retaining bolt. Disconnect neutral safety switch 2 wire connector. See Fig 1 .
  2. Connect a DVOM to neutral safety switch connector terminals. Rotate neutral safety switch as far clockwise (downward) as possible.
  3. Slowly rotate neutral safety switch counterclockwise (upward) until a "click" sound is heard and continuity is obtained on DVOM. Tighten switch retaining bolt to 15 ft. lbs. (20 N.m). Connect neutral safety switch connector and negative battery cable.
Fig 1: Adjusting Neutral Safety Switch (3-Speed)
G93C82745Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals