LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1996 >> Tracker Base, 4D Utility, RWD >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Window Regulator & Motor >> Front

Window Regulator & Motor: Front

  1. Remove door trim cover. See DOOR TRIM COVER  . Lower front side door window completely. Using a flat-bladed tool wrapped in tape, gently pry inner and outer sealing strips from door (if equipped). Remove water deflector to gain access to 2 window-to-regulator equalizer bracket screws.
  2. Remove screws. Remove window. As window is removed, tilt top of window inward to clear regulator run channel. Remove 6 window regulator screws. Remove window regulator through large opening in inner door panel. To install, reverse removal procedure. Adjust window-to-regulator equalizer bracket screws so that clearance between top of window and door frame is equal.
scientia non olet · About LEMON Manuals