LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1996 >> Metro Base, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul 1.0 & 1.3L >> Fuel System >> Injector (TBI) >> Removal

Injector (TBI): Removal

  1. Relieve fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE. Disconnect negative battery cable. Remove air cleaner assembly and mounting bracket. Remove injector cover and upper insulator. See Figure.
  2. Remove 2 screws and injector cover with electrical connector from TBI. See Figure. Slide injector harness grommet from throttle body, and remove injector.
NOTE: It is important to replace a fuel injector with an identical part. Injectors may look alike but are calibrated for different flow rates.
scientia non olet · About LEMON Manuals