LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1994 >> Tracker Base, 1.6 6, 4WD, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> Bench Testing >> Rotor Test

Rotor Test

  1. Using an ohmmeter, measure resistance between rotor and slip rings (STEP 1 in illustration). See Fig 1 . If resistance is less than 5 ohms, replace rotor.
  2. Using an ohmmeter, measure resistance between slip rings (STEP 2 in illustration). See Fig 1 . If resistance is greater than 3.5 ohms, replace rotor.
Fig 1: Testing Alternator Rotor
G91D02005Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals